FURUNO 1942 MK2 RADAR 64NM 10" DISPLAY 6 KW - FURUNO 1942MK2

Engineered for 30'- 65' boats, the Furuno 1932MK2 radar offers exceptional power, target detection and reliability. Featuring Furuno's custom microwave IC receiver design, this radar has a 10" diagonal CRT daylight-bright display with eight-level quantization. Plus, it's packed with high-speed micro-processor technology and features that help you identify what's out there. And like other Furuno radars, it can be inter-connected with other nav equipment, chart plotters and even sounders, through Furuno's programmable NMEA 0183 interface system. The 1942MK2 comes with a 4' open array antenna.


Standard Features

• High Resolution, Non-Glare 10 Inch CRT Display
  
• 6.0 Kilowatt Transmitter Unit
  
• Up to 17 User Selected Range Scales from 1/8th to 64 NM
  
• User Adjustable Duplex (In or Out) Radar (Guard Zone) Alarm
  
• User Selected Time Echo Trails for Target Threat Assessment
  
• Automatic or Manual Tuning Receiver
  
• 6db Noise Factor Logarithmic Receiver
  
• Three Modulator Pulse lengths and Repetition Rates
  
• Programmable F1 and F2 Keys for Optimized Radar Picture
  
• Automatic or Manual Control of Rain Clutter (FTC)
  
• Automatic or Manual Control of Sea Clutter (STC)
  
• Waypoint Lollipop Navigation Aid Overlaid on Radar Picture **
  
• Power Saving Watchman, or Sleep Mode for Safety at Anchor
  
• Multi-step Interference Rejecter and Echo Stretch to Enhance Picture
  
• 100% Picture Off-Centering or 2 x Target Area Zoom
  
• Two VRM's and EBL's for Rapid Target Data, one may be Offset
  
• Course-up, Head-up, North-up or True Motion Display Modes **
  
• Navigation Data Display in Standby *
  
• Automatic Video Level Adjustment (up to 8 Levels) for Picture Enhancement
  
• Target/Cursor Position and Output to Plotter, using TLL Key **
  
• Optional ARP10, 10 Target ARPA **

Shipping Information

• 99 Lbs., 4 Cartons

Power Requirements

• 12 or 24/32 VDC, 52 Watts, Fuse Change Required
  
• 28 Watts in Power Economy, Standby or Watchman Mode

Notes

1. *Appropriate Nav Data Input Required.
   
2. **Appropriate Compass and Nav Data Input, Required